Heavy Duty Wood Horizontal Band Saw

Wood Horizontal Band Saw For Sale

• Max.Working Width(mm):650mm
• Main Motor power: 15kw/18.5kw/22kw
• Feed speed: :0-18m/ min
• Saw wheel dia(mm) : 8000mm
• Working voltage : 380V/50Hz/3phase, Customized
• Application :Horizontal band saw Mainly used for composite floor panel processing, suitable for wood panels, solid wood flooring, puzzles and other decorative veneer panels the forefront of equipment, high precision, fast, ultra-thin cutting.

Wood horizontal band saws are widely used in solid wood board cutting (pine, fir, oak, poplar, mahogany, etc.); with high sawing efficiency/small sawing path/good finish, each board can save 4-5mm compared with traditional vertical saws. Compared with traditional horizontal band saws, the saw wheel diameter is 800mm, the speed is faster, and the friction between the saw blade and the wheel increases due to the increased contact surface, the pulling force also increases, the saw blade life can be extended, and the cost is more saved. The sawing path and work difference material are smaller than the old band saw, and the process of over-pressure planing can be omitted later. Sanding can be done directly or after drying, saving wages and material costs;

Compared with the old vertical band saw, the technical requirements for the master are lowered, thereby solving the problem of difficulty in recruiting workers and reducing wage costs; because there is no need to contact the saw blade at close range, production safety can be guaranteed and the risk of work-related injuries can be reduced; the equipment advantage lies in the characteristics of saving labor/materials/safety.

1. High speed: hydraulic feeding speed 0-18 m/min, saw wheel diameter 800mm, saw wheel outer circle contact surface large to increase friction, 50% faster than conventional horizontal band saws.

2. Low consumption

• Labor saving: production efficiency increased by 50%, relative production labor reduced by 1/2.
• Saw blade saving: saw blade life increased by 50%, speed increased by 50%, relative saw blade cost reduced by 1/2.
• Material saving: small saw path, smooth board surface, good finish, compared with traditional vertical saw, each board can save 4-5mm saw path and work error materials, and the process of over-pressing planing can be omitted later, and sanding can be done directly or after drying, saving materials.

3. Large range of saw blade lifting height: 0-300mm can cut small logs.

4. Digital display thickness setting: digital keyboard buttons set board thickness, quick and convenient operation, accurate positioning.

5. Intelligent: worm gear reducer intelligent positioning is more accurate and reduces errors.

1. Strong frame: The frame is made of thick square tubes and fully welded. The whole machine has good rigidity. It reduces the vibration of the whole machine when starting or lifting, so that the equipment can run smoothly and feed materials, and prevent the sawing effect from being affected by vibration.

2. Workbench: The workbench is made of 8MM thick plates and fully welded. The root plate is then covered at the bottom, and the table surface is smoothed by milling process, which reduces the vibration caused by the friction of the conveyor belt and prevents the deformation caused by force from affecting the sawing effect and precision control, thereby improving efficiency and reducing the scrap rate.

3. Gantry: The column gantry structure is adopted, which can directly pass 300mm high wood, which is suitable for domestic small round wood cutting. The traditional horizontal band saw can only pass 200mm high wood.

4. Lifting system: Using Taiwan brand ABBA precision screw rod, the lifting height can be freely set within 300MM, which is convenient for adjusting the thickness of the sawing board, accurate positioning, and ensuring the standard setting of the board thickness.

5. Lifting guide rail: lifting guide function, the saw wheel frame is driven by the screw rod to lift smoothly, and it is not easy to swing and affect the work difference.

6. Worm reducer: intelligent positioning is more accurate and reduces the opening error.

7. Saw wheel bottom plate: laser cutting saw wheel bottom plate is adopted, square tubes are reasonably distributed vertically and horizontally as reinforcing ribs, and then welded by full welding method, which can ensure the strength of the entire bottom plate and avoid deformation of the machine during long-term use, which directly affects the service life of the saw blade.

8. Feeding device: The feeding table uses a seat bearing as a transmission to drive the specially designed feeding wheel to rotate, and then drive the anti-slip straight belt forward to complete the feeding. The unique arc design of the feeding wheel can ensure that the feeding process will not affect the feeding stability due to the left and right swing of the conveyor belt, which directly affects the sawing effect.

9. Saw wheel: The national standard steel with high hardness is precisely processed into a 800mm diameter and 42mm thick saw wheel through ten processes. It has the characteristics of good stability, wear resistance, and is larger than the traditional horizontal band saw wheel. The saw surface contact surface is large, the speed is faster, and the saw blade is more durable. The unique outer circle design makes the saw blade not easy to run, the sawing is accurate, the scrap rate is reduced, and the customer’s use cost is reduced.

10. Heavy-duty bearing device: The saw wheel uses NSK heavy-duty separation bearings inside. The large contact surface ensures that the saw blade can withstand the tension when the tension force is too large, so that the deformation of the two saw wheels is small when tensioning, reducing the wear rate of the outer circle of the saw wheel, extending the service life of the saw wheel, and reducing the probability of saw blade breakage.

11. Saw wheel tensioning guide: The German Rexroth guide slider is used for the guide. When the saw wheel is tensioned, the slider gap is small, the saw wheel is not easy to swing, the saw blade has good stability, and effective control extends the life of the saw blade and saves costs. One person can easily install the saw blade.

12. Fully automatic tensioning system: The fully automatic tensioning function makes it more convenient and quick to replace the saw blade. One person can complete it quickly. It also has a pressure-maintaining function, which can automatically increase the pressure when the saw blade heats up during sawing, ensuring that the saw blade is in a stable position and is not prone to breaking or sawing. It ensures that the sawed board will not become waste due to poor sawing workmanship, thereby improving production efficiency, extending the life of the saw blade, reducing waste, and thus reducing production costs.

Horizontal band saws are widely used in solid wood panel cutting (pine, fir, oak, poplar, mahogany, etc.), with the characteristics of efficient and precise sawing, labor-saving, material-saving and safety.